Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Fireplace Services in Paterson: What to Know First
As an independent Olympia Chimney service provider, we repair and service Olympia Chimney fireplace systems throughout Paterson, from gas fireplace tune-ups to firebox rebuilds on wood-burning units. Most Olympia Chimney jobs in Paterson run $180-$650 depending on the series and what’s worn out, and we stock common parts so most repairs finish in one visit. We’re Hearthstone Chimney Co., and we’ve been working on chimneys in Passaic County since 1984. If your Olympia Chimney fireplace isn’t drafting right, won’t stay lit, or you’re hearing odd blower noise, call us at (973) 604-2986. A live person answers, and estimates are free.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia Chimney OL-18 and OL-24 wood-burning inserts: The refractory panels in these units crack diagonally across the firebox floor after seven to ten years of Paterson freeze-thaw cycling. The panels are cement-bonded and can’t be patched safely. We pull the insert, install factory-matched refractory panels, and reseal the surround. Done right, and we stand behind it.
- Olympia Chimney gas direct-vent fireplaces (GDV32, GDV36 series): The pilot assembly collects condensation residue from Paterson’s humid summer months, leading to intermittent ignition or a pilot that won’t stay lit. Cleaning the orifice helps temporarily, but we replace the pilot assembly with an OEM-spec unit and verify millivolt output at the valve. Photos you can see, a plain-English verdict.
- Olympia Chimney chimney-top dampers (CTD series):strong> The stainless cable frays where it passes through the chimney cap guide, especially on taller Paterson colonials with exposed flue runs. We don’t just swap the cable. We inspect the cast-aluminum damper frame for warping from over-tensioning, then install a Gelco or OEM replacement with proper cable routing.
- Olympia Chimney fireplace inserts with factory blowers: The sleeve bearings dry out and the blower wheel gets out of balance, causing a rumble that owners mistake for a venting problem. We test amperage draw against the nameplate spec, replace the blower with an exact-match or upgrade to a higher-CFM unit if the original is discontinued, and verify heat-shield clearance.
- Olympia Chimney firebox throat dampers (older TD-series): The cast-iron frame corrodes at the pivot pin bosses, causing the damper plate to drop out of square and leak conditioned air year-round. In Paterson’s older Eastside homes, we see this where coal-to-gas conversions left acidic residue. We measure the throat opening and fabricate a custom replacement or recommend a lock-top damper if the frame is too far gone. We’ll say so upfront if it’s ugly before it gets better.
Our Olympia Chimney Fireplace Services Process
- 1
Call and schedule: A live person answers, asks what series you have if you know it, and books a window. No app, no callback queue.
- 2
Level-2 camera inspection: Our tech arrives uniformed and background-checked, runs a camera up the flue, and photographs the firebox, damper, and connector pipe. You see the images on a tablet while we explain what we’re looking at.
- 3
Parts decision: For discontinued Olympia Chimney components, we source quality aftermarket from our regular suppliers, DuraFlex, HeatShield, or Gelco, or track down OEM if the part is still in production. We tell you which we’re using and why, with pricing before any work starts.
- 4
The repair: Most jobs complete in a single visit. We work with the unit cold, protect your floors and mantel, and test every function before we pack up.
- 5
Documentation and guarantee: You get photos, a written verdict, and the 90-Day Done Right Promise in writing, no arguing. If it’s not right, we come back.
- 6
Cleanup and close: We haul away old parts, vacuum the hearth area with a HEPA unit, and leave a card with our direct line. The number on the estimate is the number on the invoice.
What Olympia Chimney Fireplace Services Costs in Paterson
| Service | Typical Range |
|---|---|
| Gas fireplace tune-up and safety check | $89-$175 |
| Pilot assembly replacement (GDV series) | $180-$290 |
| Blower motor replacement | $240-$380 |
| Refractory panel replacement (OL insert) | $340-$550 |
| Firebox throat damper repair or replacement | $280-$650 |
| Chimney-top damper cable and hardware | $220-$420 |
What moves the price: accessibility (insert removals take longer), whether the part is still manufactured, and if the surrounding masonry needs attention. We don’t recommend anything you can’t see for yourself on camera. Call (973) 604-2986 for an exact quote. Estimates are free, and our $89 Seasonal Tune-Up applies to most gas units.
Why Paterson Homeowners Call Hearthstone Chimney Co. for Olympia Chimney Work
We’ve been sweeping and repairing chimneys in Paterson neighborhoods from Eastside to the blocks around Garrett Mountain for over 42 years. Russell Haines learned this trade at Los Angeles Trade-Technical College and has spent the better part of two decades working Passaic County stacks. He keeps a small notebook in his truck where he sketches damper problems just to make sure nothing gets missed.
Our techs know Olympia Chimney products specifically, not just fireplaces in general. We carry DuraFlex, HeatShield, and Gelco materials alongside Olympia Chimney OEM when it’s available, so you’re not waiting on a backordered part while burning season slips away. The 90-Day Done Right Promise means if something isn’t holding, we make it right in writing, no arguing. A square deal: no surprises on the bill. We’ll be there when we say.
FAQs
No. Routine maintenance and repair by a qualified independent technician does not void your warranty, though we are not an authorized Olympia Chimney dealer. We document our work with photos and written records, which you’ll want if you ever file a warranty claim. Call (973) 604-2986 if you need help understanding what’s covered.
Replacement becomes the honest recommendation when the firebox is cracked through to the outer shell, the heat exchanger is compromised, or repair parts have been discontinued for more than five years. We show you the camera footage and explain both options with real numbers. Call for a free second opinion on any written estimate.
Some are, some aren’t. The GDV gas series and CTD dampers still have active part numbers. Older OL-series inserts and TD dampers often require quality aftermarket from DuraFlex, HeatShield, or Gelco, which we stock. We never substitute builder-grade materials. Call (973) 604-2986 to check availability for your model.
Annually, before the first fire of the season. In Paterson, we schedule most gas service calls in September and October so you’re not competing for appointments when the temperature drops. Our $89 Seasonal Tune-Up covers cleaning, pilot adjustment, blower check, and venting verification. Call to book.
Combustible creosote builds up in the flue, increasing chimney fire risk. A blocked or damaged liner can also force carbon monoxide into living spaces. We find the problem, say what it is, fix it right. Call (973) 604-2986 for a camera inspection if it’s been more than a year.
Written by Russell Haines, Owner, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving Paterson and nearby areas.